Ripple Generator 2550

MPN: RIPPLE2550 Category:

ECM’s Ripple Generator Model 2550 is designed to go between a DC power supply and device under test (DUT).  The Ripple Generator modifies the voltage seen by the DUT by adding voltage waveforms of programmable type, magnitude, and frequency to the basic power supply output.  By adding waveforms to the voltage seen by your DUT, you can study the sensitivity of your DUT and battery to power line noise.

Product Specifications

Max. Input Voltage 500 VDC
Max. Current 40A RMS
Programmable Voltage Added 0 to 50V, or to one-half of input voltage (peak-to-peak). This voltage is added onto the power supply voltage, which itself can be as high as 500V.
Programmable Waveform Sinusoidal (Others optional. Contact ECM.)
Programmable Frequency 1KHz to 25KHz (Model A), 100Hz to 25KHz (Model B)
Programming Interface Front Panel, CAN (CANopen), RS232
Dimensions 19″ Rackmount, 3.75″ tall, 20lbm (Model A)
19″ Rackmount, 5.75″ tall, 23lbm (Model B)
Power 24 VDC, 4A to power control electronics

Included Kit Components

Filters Sort results

Downloads

Ripple Generator 2550 Manual (Ver. 2010-04-19, 303 KB)
2550 Ripple Generator Brochure (Ver. 03-20-2013, 367 KB)
ECM Configuration Tool (Ver. 4.48.20, 30 MB)