Home > Air-Fuel Ratio, Oxygen, & Lambda Modules > dashCAN2
ECM's dashCAN2 is a small, two-channel remote display for LambdaCAN, NOxCAN, NH3CAN, and baroCAN CAN networks. Simply attach dashCAN2 to the CAN bus and any two parameters from the network can be displayed and output as analog signals. Perfect for dashboard use, dashCAN2 uses tall (13mm), 15-segment LED digits for easy viewing at all cabin temperatures and lighting conditions. The LambdaCAN, NOxCAN, NH3CAN, and baroCAN modules' parameters, display update rates, and analog output scaling are programmable via buttons on the dashCAN2. 2m shielded CAN cabling with integral power (8-28VDC) and female screw inserts make mounting easy. Multiple dashCAN2s can be attached to the CAN bus. ECM's dashCAN2 is a superb addition to your ECM LambdaCAN, NOxCAN, NH3CAN, and baroCAN network.
  • Display and Output Parameters from One or Two Modules
  • 2 Analog Outputs (if one module selected)
  • 1 Analog Output per Module (if two modules selected)
  • 0 to 5V or 0 to 1V (selectable) Programmable Outputs
  • Opto-isolated Analog Outputs (from CAN Power)
  • Programmable Display Update Rate
  • Knob for Display Intensity
  • Readable when Cold (LEDs)
  • 8 to 28 VDC, 150mA at 12VDC
  • -40 to +105°C Operation
  • 120 mm x 65 mm x 60 mm
  • 248 gm
Jump to Optional Kits and Parts
Related Downloads:
dashCAN & dashCAN+ Brochure (10-16-2011, 203KB)
Rackmount Installation Guide (197KB)
Firmware Update Procedure for Display Heads (158KB)
Ordering Information, Complete Kit P/N: dashCAN2
The complete kit includes the following parts:
2.Flexi-Eurofast-Lemo Cable, 2m09-111
3.Eurofast "T" Connector09-051

Optional Kits and Parts:

1.19" Rackmount Panel (holds up to 4 display heads or 4 dashCANs)12-011
2.Lemo Termination Resistor09-101